Guide

How to Print Graph Paper at Actual Size

Updated

If your printed 5 mm grid measures 4.8 mm, or a quarter-inch grid comes out a little under a quarter inch, the file is almost never the problem. The print dialog scaled the page. This guide explains why that happens, the exact setting to change in each browser, and a one-minute test that tells you whether a print is true to size.

The short answer

  1. Open the print dialog and find the Scale setting (in Chrome it is under More settings).
  2. Set Scale to 100% or Default. Do not use 'Fit to page', 'Fit to printable area' or 'Shrink to fit'.
  3. Set Margins to None or Minimum.
  4. Make sure the paper size in the dialog matches the paper in the tray (Letter or A4).
  5. Print one page and measure it before printing a stack.

Or skip the browser's print dialog: every template has a Download button and direct PDF links. Open the PDF and print it with 'Actual size' selected.

Why prints come out too small

Most desktop printers cannot print to the very edge of the sheet. They keep an unprintable border of a few millimetres on each side. To make sure nothing is cut off, browsers and PDF viewers offer to shrink the whole page until it fits inside that border, and many enable the option by default. The reduction is usually between 3 and 6 percent.

For a letter or a photo that is harmless. For graph paper it changes every measurement on the page: at 96 percent a 5 mm cell becomes 4.8 mm, a 1 cm cell becomes 9.6 mm and a 1/4 inch cell becomes 0.24 inch. Across twenty cells the error is 4 mm, enough to make a scale drawing wrong.

The grids on this site stop about 12 mm inside the page edge, which is within the printable area of ordinary printers. That is why nothing is lost when you turn scaling off.

Settings for each browser and device

  • Chrome and Edge: in the print dialog open More settings. Set Scale to Default (or Custom, 100). Set Margins to None or Minimum. Edge labels the option 'Scale (%)'; choose Actual size or enter 100.
  • Firefox: in the print panel set Scale to 100, not 'Fit to page width'. Set Margins to None.
  • Safari on Mac: click Show Details in the print dialog. Set Scale to 100%. Untick 'Print headers and footers'.
  • Adobe Acrobat and other PDF viewers: under Page Sizing choose Actual size, not Fit or Shrink oversized pages.
  • Preview on Mac: set Scale to 100% and untick 'Scale to Fit'.
  • iPhone and iPad: the AirPrint dialog has no scale setting. Download the PDF, open it from Files and print from there.
  • Android: in the print preview, expand the options and check that the paper size matches your paper. If your printer app offers 'Fit to page', turn it off.

The 5-cell ruler test

  1. Print one page.
  2. Lay a ruler across exactly 5 cells, from the middle of one line to the middle of the line five cells along.
  3. Compare with the table below. If you are within about half a millimetre, the print is correct.

Measuring one cell is too imprecise; measure several and the error becomes visible.

Template5 cells should measureAt 96% scale you get
1 mm graph paper (use 50 cells)50 mm48 mm
5 mm graph paper25 mm24 mm
1 cm graph paper50 mm48 mm
1/4 inch graph paper1.25 in (31.75 mm)1.2 in (30.5 mm)
1/2 inch graph paper2.5 in (63.5 mm)2.4 in (61 mm)
1 inch graph paper5 in (127 mm)4.8 in (122 mm)

No ruler? Print one

The printable ruler is drawn at actual size in centimetres and inches. Print it with the same settings you plan to use and hold it against something of known size. A standard bank or credit card is 85.6 mm wide. If the paper ruler agrees, your settings are right for every other template too.

Other things that change the size

  • Wrong paper size selected. Printing an A4 page on Letter paper (or the reverse) makes the driver either scale or crop. Choose the template size that matches your paper.
  • 'Borderless' printing. Photo-style borderless modes enlarge the page slightly so ink runs past the edge. Turn borderless off for graph paper.
  • Printing two pages per sheet. This always scales the page; do not use it when cell size matters.
  • Humidity. Paper swells slightly when damp. The effect is a fraction of a percent, but it is why engineering drawings are not measured off paper.

Frequently asked questions

Why is my printed graph paper slightly smaller than it should be?+

The print dialog scaled the page to fit inside the printer's unprintable margins, usually by 3 to 6 percent. Set Scale to 100% (Default in Chrome) and reprint.

What does 'actual size' mean when printing?+

It means the page is printed at 100 percent, with no enlargement or reduction, so one millimetre in the file is one millimetre on paper.

Will the grid be cut off if I turn off 'Fit to page'?+

No. The grids stop about 12 mm from the page edge, inside the printable area of ordinary inkjet and laser printers.

Is the PDF more accurate than printing from the browser?+

The PDF and the browser print are the same drawing. The PDF is safer only because PDF viewers have a clear 'Actual size' option, while browser print dialogs often default to fitting.

How accurate is a home printer?+

At 100 percent scale, ordinary printers are typically accurate to a few tenths of a millimetre over the length of a page, which is fine for schoolwork, crafts and sketches.

More guides

Browse all templates