# 1 Inch Hex Battle Map (D&D Miniatures)

> Hex grid with 1 inch (25.4 mm) hexes, flat-to-flat: one hex per miniature on a standard 25 mm base, for D&D, Pathfinder and GURPS combat.

Free printable 1 inch hex battle map (d&d miniatures) from Printable Graph Paper. Page: https://printablegraphpaper.org/graph-paper/hex-battle-map-1-inch

A battle map of hexagons that measure exactly 1 inch (25.4 mm) from flat side to flat side. That is the size a miniature on a standard 25 mm round base fills, so each hex holds one figure and stands for 5 feet of game space, the same scale as a 1 inch square grid. Only whole hexes are printed, so there are no clipped half-cells at the page edge.

## At a glance

- Category: [Specialty](https://printablegraphpaper.org/category/specialty)
- Direct PDF downloads: [Letter](https://printablegraphpaper.org/pdf/hex-battle-map-1-inch-letter.pdf), [A4](https://printablegraphpaper.org/pdf/hex-battle-map-1-inch-a4.pdf)
- Paper sizes: Letter (8.5" × 11"), A4 (210 × 297 mm), A5 (148 × 210 mm), Half Letter (5.5" × 8.5"), B5 (176 × 250 mm), Legal (8.5" × 14"), 11" × 17", A3 (297 × 420 mm), A2 (420 × 594 mm), Poster (18" × 24"), Movie Poster (27" × 40"), Letter Landscape (11" × 8.5"), A4 Landscape (297 × 210 mm), Tabloid Landscape (17" × 11")
- Line colors: Faint, Light, Gray, Dark, Black, Blue, Green (default: Dark)
- Format: vector PDF download at exact physical scale, or direct browser print
- Price: free, no signup, no watermark; printed sheets may be used for personal, classroom and commercial work

## Good for

- D&D and Pathfinder combat on a hex grid instead of squares
- GURPS and The Fantasy Trip tactical combat (1 inch hexes)
- Skirmish games with miniatures on 25 mm or 1 inch bases
- Printing and tiling pages into a full-table battle mat

## About 1 inch hex battle map (d&d miniatures)

Most tabletop RPG miniatures stand on a 25 mm (1 inch) round base, and most battle grids are built around it: 1 inch on the table equals 5 feet in the game. On a square grid that scale causes a well-known problem. A diagonal step covers about 1.4 times the distance of a straight one, so rule sets either ignore the difference or ask you to count alternating diagonals as double. A hex grid removes the problem, because all six neighbouring hexes are the same distance away. The fifth edition Dungeon Master's Guide describes playing on hexes as an option, GURPS has used 1 inch hexes as its standard combat map for decades, and many groups prefer hexes for outdoor encounters where there are no straight walls to line up with. A hex is measured flat-to-flat, and at 1 inch flat-to-flat a 25 mm round base touches all six sides, so the figure sits in the hex without overlapping its neighbours. Movement converts directly from a square grid: a speed of 30 feet is six hexes. This template is the hex counterpart of our [dungeon map paper](https://printablegraphpaper.org/graph-paper/dungeon-map-paper); the smaller [hex battle map](https://printablegraphpaper.org/graph-paper/hex-battle-map) has 16 mm hexes, which suit cardboard counters but are too small for a miniature.

## What's on the page

Flat-top hexagons 1 inch (25.4 mm) flat-to-flat and about 1.15 inches (29.3 mm) point-to-point, with sides of about 14.7 mm. Only complete hexes are drawn and the block is centred on the page: 8 columns × 9 rows (72 hexes) on US Letter, 8 × 10 on A4, 11 × 7 on Letter landscape and 11 × 15 on 11 × 17. Alternate columns sit half a hex lower, as on any flat-top hex map.

## How to use it well

- **Print at 100 percent.** Choose 'Actual size' or 100 % in the print dialog. 'Fit to page' shrinks the sheet by a few percent, and a hex that should be 1 inch comes out too small for a 25 mm base. Check the first print with a ruler across the flat sides of one hex.
- **Tile pages for a bigger map.** One Letter sheet is enough for a small skirmish. For a full encounter, print several sheets, trim the margins along the hex edges and tape them from behind. If you have access to a large-format printer, the Poster size gives a single-sheet map.
- **Make it reusable.** Laminate the sheet or slide it into a clear page protector and draw terrain with wet-erase markers. One printed map then lasts a whole campaign.
- **Decide facing before play.** On hexes a figure can face a side or a corner. GURPS faces a hex side; most D&D groups ignore facing. Agree which you use, because it changes what counts as flanking.
- **Count larger creatures in whole hexes.** A Large creature (2 inch base) covers three hexes in a triangle, or one hex and parts of its neighbours. Pick one convention and use it for every large figure.

## Common mistakes to avoid

- Printing with 'Fit to page' or 'Shrink oversized pages' enabled. The hexes come out smaller than 1 inch and bases overlap their neighbours.
- Drawing straight dungeon walls on hexes. Walls that run across the columns cut hexes in half and leave arguments about who can stand where. Use hexes for caves, forests and open ground, and [dungeon map paper](https://printablegraphpaper.org/graph-paper/dungeon-map-paper) for corridors and rooms.
- Measuring the hex point-to-point. A 1 inch hex is 1 inch across the flats; corner to corner it is about 1.15 inches. A map sold as '1 inch point-to-point' is smaller and a 25 mm base won't fit.

## FAQ

### Will a 25 mm miniature base fit in one hex?

Yes. The hexes are 25.4 mm (1 inch) across the flat sides, so a 25 mm round base fits with a fraction of a millimetre to spare. 28 mm and 32 mm bases overhang slightly but still work, as they do on a 1 inch square grid.

### How many hexes fit on a page?

72 whole hexes (8 columns × 9 rows) on US Letter, 80 (8 × 10) on A4, 77 (11 × 7) on Letter landscape and 165 (11 × 15) on 11 × 17. Larger sizes up to 27 × 40 inches are in the size picker.

### Can I play D&D on a hex grid?

Yes. The fifth edition Dungeon Master's Guide covers it as an option. Each hex is 5 feet, so speeds and ranges convert directly: 30 feet of movement is six hexes. The main changes are that there are no diagonals to count and that areas of effect are counted in hexes.

### Is the 1 inch measured flat-to-flat or point-to-point?

Flat-to-flat, which is the convention for battle maps and the measurement that matters for fitting a round base. Point-to-point the hexes are about 1.15 inches (29.3 mm).

### Is there a square-grid version?

Yes. [Dungeon map paper](https://printablegraphpaper.org/graph-paper/dungeon-map-paper) has a 1 inch square grid with 1/4 inch subdivisions, and plain [1 inch graph paper](https://printablegraphpaper.org/graph-paper/graph-paper-1-inch) has the squares alone.

### Do you have smaller hexes?

Yes. The [hex battle map](https://printablegraphpaper.org/graph-paper/hex-battle-map) uses 16 mm hexes for counters, and [hexagonal graph paper](https://printablegraphpaper.org/graph-paper/hexagonal-graph-paper) uses 8 mm hexes for sketching and chemistry.

## How to print at the correct size

Set the browser print scale to 100% (never "Fit to page") and margins to None or Minimum, or use the Download button for a PDF dimensioned in millimetres. To check, measure 5 cells with a ruler: a 5 mm grid should read 25 mm.
